UNITED STATES SUPREME COURT DECISIONS ON-LINE

CARBON STEEL CO. V. LEWELLYN, 251 U. S. 501 (1920)

251 U. S. 501

U.S. Supreme Court

Carbon Steel Co. v. Lewellyn, 251 U.S. 501 (1920)

Carbon Steel Company v. Lewellyn

No. 535

Argued January 12, 1920

Decided March 1, 1920

251 U.S. 501

CERTIORARI TO THE CIRCUIT COURT OF APPEALS

FOR THE THIRD CIRCUIT

Syllabus

The rule of strict construction will not be pressed so far as to reduce a taxing statute to a practical nullity by permitting easy evasion. P. 251 U. S. 505.

The Munitions Manufacturer's Tax payable under the Act of September 8, 1916, c. 463, § 301, 39 Stat. 780, by persons "manufacturing" shells, etc., and computed as an excise of 12 1/2 percent upon the net profit from the sale or disposition of such article "manufactured" clubjuris

Page 251 U. S. 502

within the United States, applies to the profits derived from sale of shells under contract to the British government by one who performed the manufacture in its early stage only, and had the subsequent operations performed by subcontractors, furnishing them the steel so partly manufactured, with some of the other materials, retaining ownership of materials when furnished, and control of the operations, and owning the shell when completed. P. 251 U. S. 503.

This liability is not affected by the fact that the subcontractors paid a similar tax on their profits. P. 251 U. S. 506.

258 F.5d 3 affirmed.

The case is stated in the opinion.

MR. JUSTICE McKENNA delivered the opinion of the Court.

Petitioner brought this action against Lewellyn, who is Collector of Internal Revenue for the Twenty-Third District of Pennsylvania, to recover the sum of $271,062.62, with interest from December 29, 1917, paid to him, under a demand made by him, as collector for an excise tax assessed under § 301 of Title III of the Act of September 8, 1916, known as "munition manufacturer's tax."

Petitioner made a verified return under protest, reciting its belief that the tax should be abated for the following reasons: (1) it (petitioner) did not manufacture munitions; (2) the munitions taxed were manufactured by certain independent contractors; (3) the profit derived by petitioner was from the sale of the munitions, not from their manufacture.

The tax was not abated, and petitioner paid it under protest. clubjuris

Page 251 U. S. 503

The facts are stipulated: petitioner, through its president, who went to England, entered into three contracts with the British government dated, respectively, January 26, September 29, and October 7, 1915, for the manufacture and delivery f.a.s. New York, of a certain number of high explosive shells.

The work to complete the shells consisted of the following operations: (1) obtaining suitable steel in bar form; (2) cutting or breaking the bars to proper length; (3) converting the bars or slugs into a hollow shell forging by means of a hydraulic press; (4) turning the shell upon a lathe to exact dimensions; (5) closing one end of the forging to form the nose of the shell; (6) drilling out the case of the shell and inserting a base plate; (7) threading the nose of the shell and inserting the nose bushing and inserting in the nose bushing a wooden plug to protect the thread thereof; (8) cutting a groove around the circumference of the shell and inserting thereon a copper driving band and turning the band to required dimensions; (9) varnishing, greasing, and crating the completed shell.

Petitioner was not equipped, nor did it have facilities, for doing any of the described work except the manufacture of steel suitable for the shells in bar form, and therefore, to procure the manufacture of the shells, it (petitioner) did certain work and entered into numerous contracts in relation to the various steps in making a completed shell.

These steps are not necessary to give. The question in the case is not a broad one, and all of the details of the stipulation are not necessary to its decision. The essential elements of fact we have given, and whether they bring petitioner within the munitions Tax Act we shall proceed to consider.

The act is as follows:

"Sec. 301. (1) That every person manufacturing . . . (c) projectiles, shells, or topedoes of any kind . . . or (f) any part of any of the articles mentioned in . . . (c) . . . shall pay

Page 251 U. S. 504

for each taxable year, in addition to the income tax imposed by Title I, an excise tax of twelve and one-half percentum upon the entire net profits actually received or accrued for said year from the sale or disposition of such articles manufactured within the United States. . . ."

The act is explicit in its declaration; perplexity and controversy come over its application. One must be a "person manufacturing" to incur the tax, but who is to be regarded as such person in the sense of the act? Or, to put it another way, when is "manufacturing" (the word of the act) done, and when is "manufactured" (the word of the act) attained? In elucidation of the words, the specifications enumerate nine operations to produce a shell -- that is, a completed shell (except for explosive charge and detonating device) such as petitioner contracted to deliver to the British government. And all of the operations are asserted to be necessary, and all must be performed seemingly by the same person in order that he may be designated as a "person manufacturing." We put aside for the purpose of testing the contention the provision of the act making a person manufacturing "any part of any of the articles mentioned" subject to "a tax."

The contention reduces the act to a practical nullity on account of the ease of its evasion. Besides, petitioner minimizes what it did. It was the contractor for the delivery of shells, made the profits on them and the profits necessarily reimbursed all expenditures on account of the shells. It was such profits that the act was intended to reach -- profits made out of the war and taxed to defray the expense of the war. Or, as expressed by the court of appeals, Congress "felt that the large abnormal profits incident to these war contracts created a remunerative field for temporary taxation." Petitioner, it is true, used the services of others, but they were services necessary to the discharge of its obligations and to the acquisition of the profits of such discharge. And petitioner kept control clubjuris

Page 251 U. S. 505

throughout -- never took its hands off, was at pains to express the fact, and retained its ownership of all of the materials furnished by it, and the completed shell belonged to it until delivered to the British government. And further, the steel furnished by it was advanced above a crude state -- advanced to slugs. The nicking by an outside company we consider of no consequence, for after nicking they were redelivered to petitioner and by it "broken or separated" into slugs.

And petitioner supplied its respective subcontractors with other materials -- "transit plugs," "fixing screws," and "copper tubing." It is, of course, the contention of petitioner that this was furnishing, not manufacturing, and that the literal meaning of words can be insisted on in resistance to a taxing statute. We recognize the rule of construction, but it cannot be carried to reduce the statute to empty declarations. And, as we have already said, petitioner's contention would so reduce it. How universal must the manufacturing be? Will the purchase of an elemental part destroy it? And how subsidiary must the work of the subcontractor be not to relieve the contractor -- take from him the character of a "person manufacturing"? And such is the tangle of inquiries we encounter when we undertake to distinguish between what a contractor to deliver a thing does himself and what he does through others as subsidiary to his obligation.

It is, after all, but a question of the kind or degree of agency -- the difference, to use counsel's words, between "servants and general agents" and "brokers, dealers, middlemen or factors." And this distinction between the agents counsel deems important, and expresses it another way as follows:

"'Every person manufacturing' means the person doing the actual work individually, or through servants or general agents, and that the ownership of the material worked upon does not alter this meaning of the word. "

Page 251 U. S. 506

We are unable to assent to this meaning of the word. It takes from the act a great deal of utility, and makes it miss its purpose. Of course, it did not contemplate that "person manufacturing" should use his own hands -- it contemplated the use of other aid and instrumentalities, machinery, servants, and general agents, availing thereby of the world's division of labor, but it contemplated also the world's division of occupations, and, in this comprehensive way, contemplated that all of the world's efficiency might be availed of, and, when availed of for profits, the latter could not thereby escape being taxed. And where, indeed, was the hardship of it? The tax was on profits, and measured by them.

It is, however, alleged, and the stipulation shows, that the subcontracting companies paid a tax on their profits, and profits were testified to be the difference between what was paid the subcontracting companies for the work and their cost in doing it. And it thus appears, it is urged, that petitioner has been taxed upon the theory that it manufactured the shells, and the contracting companies "have been taxed for actually performing all the manufacturing necessary to complete the same shells."

But it is sufficient answer to say that the tax here in issue is the tax on the profits of the petitioner, not on the profits of the subcontractors. The question whether such subcontractors were correctly assessed concerns them, and not the petitioner, who is resisting a tax on the profits actually made by him, and none other.

We consider further discussion unnecessary.

Judgment affirmed.

MR. JUSTICE DAY and MR. JUSTICE VAN DEVANTER dissent.


ClubJuris.Com